Titan Products supply high end London Riverlight Development.
Titan Products are proud to provide combined Fan Coil and Underfloor heating control to one of London’s flagship developments. Riverlight, part of the Nine Elms development in Vauxhall, is situated on the River Thames overlooking central London and boasts some of the most sought after residential apartments in the area.
The client, St James, required a HVAC controller that would control both the under floor heating and the cooling via a Fan Coil for each apartment zone. This was achieved by using Titan Products FCU-4 controller.
The Titan Products RDU-4 interface was used to give a high-end luxurious feeling to the control operation.
Working closely with St James from early on in the development, Titan Products developed a ‘plug and play’ enclosure, which allowed the project to benefit from reduced on-site wiring and commissioning costs. Each apartment was supplied with a pre-wired, pre-set up enclosure that included all the apartment controls. All enclosures include simple plugs that will allow the installer to easily connect the controls to the under floor heating valves, the fan coil and the heating interface (HIU). Having the controllers supplied this way will greatly reduce the commissioning time required.
All products are UK designed, developed and manufactured by Titan Products.
For more information regarding any of the products mentioned please contact Titan Products on 0161 406 6480 or visit www.titanproducts.com
Titan Products continue to develop the TPZ-Net range of wireless sensors with the release of the TPZ-PIR and TPZ-PIR/LL wireless occupancy PIR sensors.
With a range of up to 12 metres, the completely wireless, battery powered PIR sensors are designed to detect movement in a space and then transmit a wireless signal to the TPZ-Net co-ordinator when movement is detected.
Communicate with the BACnet network
The co-ordinator then communicates this occupied state over a BACnet network which allows lighting and HVAC applications to be enabled when occupants enter the room. This control on demand is essential when aiming to reduce energy consumption.
The TPZ-PIR and TPZ-PIR/LL wireless occupancy sensors will transmit an unoccupied signal after a delay timer has completed its cycle uninterrupted by movement detection. This timer can be adjusted via the TPZ-Net PC commissioning software.
The TPZ-PIR/LL sensor incorporates a Light Level sensor that reports the light level (lux) every 2 minutes wirelessly when the room is in an occupied state.
When used for lighting applications the light level sensor can be used to ensure that lighting is not switched on unnecessarily. A light level high limit can be set during the commissioning process which ensures that the change of value reporting for the light level will be inhibited once the light level exceeds this level.
Fitted with a clip-in AA sized battery the TPZ-PIR wireless occupancy sensors are perfect for office, schools and other building environments where control on demand is essential to keep energy costs down.
The TPZ-Net range also includes wireless Temperature, CO2, Humidity and Light level sensors.
Incorporating Zigbee wireless technology the range creates extremely stable, self-healing mesh networking capabilities.
The TPZ-Net range is supplied with Titan Products bespoke PC interface to allow for quick and simple setup and commissioning.
Titan Products are delighted to have supplied 300+ Fan Coil Controller with BACnet communications to Broadgate Tower, London.
300+ Fan Coil Controllers supplied to Broadgate Tower
Titan Products supplied the FCU-4 fan coil controller to the Broadgate Tower project which offer native BACnet communications as standard. This allowed all controllers on the project to be integrated easily to the Building Management System (BMS). Through this integration the BMS was able to interrogate all FCU-4 controllers on the network, view their settings, make changes to the pre-configured control set up and remotely control the FCU-4 units if required.
Flexible Fan Coil Control from Titan Products
The FCU-4 controllers offer 0-10V or Relay fan speed control and are fully compatible with 0-10V, 24V AC ON/OFF, PWM or TPC heating and cooling valves. The controllers also offer inputs for condensation, remote on/off, PIR Occupancy sensors, high temperature cut out and fan proving with many more options available. The units also have the option to add a time clock and ECO settings to ensure energy usage is minimised when the offices or building areas are not occupied and energy efficiency is maximised.
For more information regarding the FCU-4 BACnet Fan Coil Controller please contact Titan Products Ltd on 0161 406 6480 or email firstname.lastname@example.org
Zigbee Wireless Sensors from Titan Products
No wiring, no worries!
Completely Wireless sensors from Titan Products.
Wide Range of Sensors!
Incorporating CO2, Temperature, Humidity, Light Level and PIR Occupancy sensors, the TPZ-Net range of wireless sensors from Titan Products allows on-site wiring and installation costs to be drastically reduced and replaced with a stable, reliable mesh network of wireless sensors. This stability is achieved through using the latest Zigbee wireless technologies.
Inbuilt BACnet Communications!
complete with BACnet communications
All sensors communicate wirelessly to the Titan Products TPZ-Net co-ordinator using Zigbee wireless technology. The TPZ-COORD/BMS collects the information from up to 99 sensor points on the wireless network and exposes these directly on to a BACnet network.
The TPZ-Net range of wireless sensors are available in Room, Outside, Duct sensors, Immersion sensors, and Clamp-on variants to suit any applications ranging from Co2 measurement in schools and offices to flow temperatures in plant rooms. Every sensor is completely wireless!
Room Sensor TPZ-Net CO2 and Temp sensor
No sensors in the TPZ-Net range require a wired supply which creates complete flexibility when choosing your optimum sensor location.
Simple Setup and long battery life!
TPZ-Net PIR Occupancy Sensor
Using Titan Products’ bespoke PC commissioning software and simple clip-in AA sized batteries the TPZ-Net range of wireless sensors are extremely easy to setup, commission and maintain. The range offers battery life up to 5 years.
Designed & Manufactured in the U.K
All TPZ-Net products are designed, developed and manufactured by Titan Products in the UK. Titan Products are continuously developing existing and new products to ensure our customers receive the best products and service available.
For more information please contact the sales team on 0161 406 6480 or email@example.com
Titan Products are pleased to the announce the addition of the Flush Mounted Discrete temperature sensor (TPFMTS) to their range of discrete and anti-ligature range of temperature sensors.
The TPFMTS is designed to fit flush to walls, ceilings and floors and can then be painted over to match any interior making the sensor the most discrete sensor that Titan Products have offered to date.
Discrete Temperature Sensing
These discrete and anti-ligature properties make the Flush Mounted Discrete temperature sensors ideal for all types of applications ranging from high end residential properties where discrete sensing is ideal to hospitals and prison applications where anti-ligature sensors are necessary.
The range also includes the popular button sensor and plate sensors which are available as standard in white, brass or stainless steel. Although these sensors can be fitted to other plates to suit the fixtures of existing buildings. The button sensors are also available without a plate to aid fitting in discrete locations.
The discrete, button and plate sensors are all available with a wide variety of thermistor types to suit all major building management systems while the 10K3 versions are fully compatible with Titan Products range of temperature controllers and BACnet products.
For more information please contact the sales team or call on 0161 406 6480
Download the Product Datasheet
Flush Mounted Temperature Sensors
Titan Products are proud to announce that over £200 has been raised by employees for the Breast Cancer Campaign. Arranged by Liz, our sales assistant, employees wore pink for the day and sold home made cakes raising over £100 for the charity which was then doubled by Titan Products. Continue reading
Titan Products have supplied 500+ FCU-4 fan coil controllers and RDU-4 interfaces to the Milton Court Residential development. Titan Products were tasked with supplying one controller for each zone that would be capable of controlling both the cooling via the fan coils and the heating via the under floor heating. This needed to be achieved without the two systems ever ‘fighting’ each other and being on at the same time.
Titan supply energy efficient Fan Coil control to the Milton Court Development
Having a dedicated R&D team on site at Titan’s head office allowed Titan Products to meet this requirement easily. This was done by writing specific software for this development to ensure the control met with the specification of the project. This control flexibility is a feature of Titan’s business that we are extremely proud of.
The project also called for the Titan FCU-4 controller to interface seamlessly with a Crestron A/V and Lighting controller. This was achieved through the inbuilt BACnet communications that come as standard on the FCU-4 and all other temperature controllers in the Titan BACnet controller range. This integration allowed the occupant to adjust all their A/V, Lighting and HVAC requirements through one central touch screen in the living area.
Flexible Fan Coil Control from Titan Products
For more information on the products mentioned in this article, or if you have a project that you would like to discuss with Titan Products, please contact us on 0161 406 6480 or email firstname.lastname@example.org
The TPVRCO2 Co2 sensor range from Titan Products:
If you want affordable, accurate and reliable CO2 sensors then look no further than the Titan Products TPVRCO2 range of Co2 sensors.
Starting at £125.00 for combined CO2 and temperature outputs the sensors are the most competitively priced on the market. With options such as LED indication for Co2 levels as well as resistive temperature outputs and an additional 0-10V signal for humidity the sensors offer all the flexibility you will need for you project!
Co2 Sensor fully compatible with BACnet Controllers
Fully compatible with Titan Products BACnet controller ranges the CO2 sensors employ non dispersive infra red (NDIR) technology to ensure the sensors remain accurate and reliable for the long term.
- 0-10V outputs
- CO2, Temp and Humidity
- Resistive output option for temperature output
- NDIR technology for high accuracy and stability
- Auto Background Calibration (ABC Logic)
- 24V AC or DC supply
Using the latest ABC logic and silicon based technology the sensors continuously self calibrate for their entire life cycle to ensure superior stability in their readings.
- Commercial buildings
- Residential buildings
- Industrial buildings
For applications which are continuously occupied Titan Products also offer a range of CO2 sensors that use special dual channel NDIR technology to calibrate against again allowing for extremely high levels are accuracy and reliability.
Titan Products also manufacture duct CO2 sensors and the completely wireless TPZ-Net CO2 sensors that incorporate Zigbee Wireless Technology.
For information on the Co2 sensors from Titan Products or any other products please visit www.titanproducts.com or contact the sales team on 0161 406 6480.
Material: Flame Retardant Polycarbonate
Sensor: NDIR technology
Outputs: 0-10V for 0-2000ppm (Co2)
0-10V for 0-50’C (Temp)
All themistors, PT100 and PT1000 (option)
Humidity 0-10V for 0-100% (option)
CO2 +/- 40ppm +2% of reading
Temp (voltage) +/- 0.5’C
Temp (resistive) +/- 0.5’C
Humidity (option) +/- 3% RH
Fan Coil Control: A closer look at the FCU-4
Titan Products manufacture and design a number of controllers designed to efficiently manage the comfort control conditions of their environment.
This article looks into the advantages of using the Titan Products FCU-4 fan coil controller and the features its offers today’s market.
FCU – 402 Controller
Titan Products have spent years developing their product range from the simple temperature sensor to complex application specific BACnet controllers but how do these products compliment each other?
This post looks into this relationship between simple monitoring and complex control to ensure that comfort levels are maintained efficiency. Continue reading